| |
|
|
 |
|
| |
 |
|
|
|
 |
|
Model CB-1750
The Clean Burn Model
CB-1750 produces approximately 175,000 BTU/hr. and
is the smallest of the low profile designs, making
it ideal for numerous applications and convenient
installations. As a broad guideline, the Model CB-1750
is suitable for facilities generating smaller quantities
of used oil annually.
|
|
• Engineered
from the ground up to burn used oils
• Patented heat exchanger generates more heat
• Unique non-welded flue tubes for longer service life
• Advanced burner preheats oil, regulates and optimizes combustion
• Swing-away burner and door make maintenance and service easy
• Longest cleaning interval of all units in its class
• Lower stack temperatures, higher heat output
• Automatic flow control means no fuel adjustment required
• The only furnace in its class UL-listed as both a unit heater and a central
(ducted) furnace
• Ideal for unit heating, or as part of a Clean Burn Recycling Center
• Unequaled service & support from your Clean Burn Distributor
• Government purchasing: GS-07F-5357P
|
|
|
| CB-1750
Specifications |
Maximum BTU/hour* |
175,000 |
Maximum
Oil Consumption* |
1.2 GPH |
Fuels |
| |
Used
Oils |
Crankcase, ATF, hydraulic |
Fuel Oils |
#2, #4, and #5 fuel oil |
Airflow
Output (CFM) |
| |
Unit Heater |
1625 |
Central furnace
(ducted) |
0.25 SPWC (in.) |
1500 |
0.30 SPWC (in.) |
1400 |
Air
Compressor* (required) |
2.0 CFM @ 20 PSI |
| (3.4 m3/h @ 1.4 bar) |
Stack
Size |
8 inch dia. (203mm dia.) |
Furnace
Dimensions - assembled |
83” L x 29.25" W
x 31.5"
H |
| (2190mm
x 743mm x 787mm) |
Approximate
Weight |
406 lbs. (182.7 kg) |
Electrical
Requirements |
115 VAC 60 Hz, single phase |
| 20 Amp circuit breaker |
| |
* Values indicated
above are nominal. Actual values will vary depending
on fuel and installation.
Furnace system includes: check valve and filter screen, in-line
washable canister filter, barometric damper, wall thermostat and oil supply
pump. |
|
|
|
|
| |
|
|
|
|
|
|
|
