| |
|
|
 |
|
| |
 |
|
|
|
  |
|
Models CB-1800
& CB-2800
Clean Burn Models CB-1800* and CB-2800* are the
original high-efficiency used-oil furnaces with the legendary Clean
Burn swing-out burner, designed to provide reliable performance for a wide
range of used-oil heating applications. The CB-1800 produces approximately
180,000 BTU/hr., and the CB-2800 produces approximately 280,000 BTU/hr. Both
are UL-listed for unit heater or central furnace (ducted) installations.
|
|
• Engineered
from the ground up to burn used oils
• Patented heat exchanger generates more heat
• Unique non-welded flue tubes for longer service life
• Advanced burner preheats oil, regulates and optimizes combustion
• Swing-away burner and door make maintenance and service easy
• Longest cleaning interval of all units in its class
• Lower stack temperatures, higher heat output
• Automatic flow control means no fuel adjustment required
• The only furnace in its class UL-listed as both a unit heater and a central
(ducted) furnace
• Ideal for unit heating, or as part of a Clean Burn Recycling Center
• Unequaled service & support from your Clean Burn Distributor
• Government purchasing: GS-07F-5357P
|
|
|
| CB-1800
Specifications |
Maximum
BTU/hour** |
185,000 |
Maximum
Oil Consumption** |
1.3 GPH |
Fuels |
| |
Used
Oils |
Crankcase, ATF, hydraulic |
Fuel Oils |
#2, #4, and #5 fuel oil |
Airflow
Output (CFM) |
| |
Unit Heater |
2200 |
Central Furnace
(w/ducting) |
0.20 SPWC (in.) |
2300 |
0.30 SPWC (in.) |
2200 |
Air
Compressor** (required) |
2.0 CFM @ 20 PSI |
| (3.4 m3/h @ 1.4 bar) |
Stack
Size |
8 inch dia. (203mm dia.) |
Furnace
Dimensions - assembled |
50” L x 42" W x
28"
H |
Approximate
Weight |
400 lbs. |
Electrical
Requirements |
115 VAC 60 Hz, single phase |
| 20 Amp circuit breaker |
| |
*Limited availability;
please check with your Clean Burn Distributor
for details.
**Values indicated
above are nominal. Actual values will vary
depending on fuel and installation.
Furnace system includes: check valve and filter screen, in-line
washable canister filter, barometric damper, wall thermostat and oil
supply pump.
|
| CB-2800
Specifications |
Maximum
BTU/hour** |
280,000 |
Maximum
Oil Consumption** |
2.0 GPH |
Fuels |
| |
Used
Oils |
Crankcase, ATF, hydraulic |
Fuel Oils |
#2, #4, and #5 fuel oil |
Airflow
Output (CFM) |
| |
Unit Heater |
3400 |
Central Furnace
(w/ducting) |
0.20 SPWC (in.) |
3300 |
0.30 SPWC (in.) |
3100 |
Air
Compressor** (required) |
2.0 CFM @ 20 PSI |
| (3.4 m3/h @ 1.4 bar) |
Stack
Size |
8 inch dia. (203mm dia.) |
Furnace
Dimensions - assembled |
63” L x 48 " W
x 33" H |
Approximate
Weight |
600 lbs. |
Electrical
Requirements |
115 VAC 60 Hz, single phase |
| 20 Amp circuit breaker |
| |
*Limited availability;
please check with your Clean Burn Distributor
for details.
**
Values indicated above are nominal. Actual
values will vary depending on fuel and installation.
Furnace system includes: check valve and filter screen, in-line
washable canister filter, barometric damper, wall thermostat and oil
supply pump.
|
|
|
|
|
| |
|
|
|
|
|
|
|
