Clean Burn multi-oil
heating systems let you safely and economically burn
used oil generated on site. It provides free heat
-- dramatically cutting or eliminating your heating
costs -- while eliminating your used oil liability
and disposal costs.
Clean Burn products are UL-listed,
meet all EPA requirements, feature advanced combustion
technology and carry a 10-year limited warranty.
Not
all used-oil-fired furnaces are built alike. In
fact, many so-called used-oil furnaces are merely
adaptations of conventional fuel-oil heating systems. Not
so with Clean Burn. Every Clean Burn furnace
is designed exclusively to burn used oil--and burn
it efficiently, safely, and reliably. From
the design of the burner and heat exchanger to the
distributor who installs and services it, a Clean
Burn furnace is your best choice in used-oil heating
and recycling. Here's why over 40,000
owners chose Clean Burn:
Heavy Duty Construction
A combustion chamber made of heavier, thicker steel results in extra durability. On
average, our furnaces weigh up to 200 lbs. more than many competitive furnaces
Patented burners with pre-heater block An innovative
burner designed
exclusively to burn used oil. Pre-heater
block assembly heats the oil and air supply to
ensure consistent oil viscosity and temperature
to the nozzle for complete combustion. Swing-away
burner design provides quick, easy access to the
combustion chamber. No need
to disconnect oil, air and electrical lines.
Heavy Duty Oil Pump
A beefy fuel
flow control pump allows the furnace
to be installed up to 300 ft. from the oil storage
tank. It
also permits the use of an outside storage tank
where, in colder temperatures, many competitive
pumps can't function.
Complete Versatility
Unique Clean Burn furnace provides design provides installation versatility.
Furnace can be ceiling mounted or placed on tank stands as part of Clean Burn's
recycling center. Burner design permits the use of readily available shop air
or fitted with a Clean Burn unit-mounted compressor.
Easy Maintenance
Larger flue passageways than found on many competitive furnaces means
longer operational time between routine cleanings. On average, a Clean
Burn furnace only requires cleaning every 700 to 1000 hours, as compared to every
350 hours for many competitive units.
Industry Leader since 1979 Dependable
installation and after-sale service and parts support.
UL-accredited research and test facility develops
continuing advances in used-oil burning technology.
All Clean Burn furnaces are UL and ULC listed and
meet EPA guidelines for the on-site recycling of
used-oil. Exclusive endorsement by General Motors
for use in their dealerships worldwide. GSA contract
#GS-07F-9531G.
The Clean
Burn CB-200/350/500-CTB Coil
Tube Boilers are engineered from the ground
up exclusively to burn used oils, and burns
standard fuel oil for added versatility. The
CB-200/350-CTB boilers provide hot water while
complying with EPA regulations for used oil
recycling through heat recovery.
The CB-200/350/500-CTB
are unique in the industry as a small scale coil
tube design. It is designed and engineered for
use as a single boiler unit or as part of a series
of boilers working as a larger system. They are
listed at 200.000 BTU/hr, 350,000 BTU/hr, and 500,000 BTU/hr respectively,
and are unsurpassed for robust engineering, construction
and reliability.
Typical
installations include car washes, truck service facilities,
radiant floor heating, and other places where economical
production of hot water is an operational benefit.
When
used in combination with a Clean Burn furnace,
a state-of-the-art Clean
Burn Recycling Center is the ideal system for collecting, storing and
generating heat recovered from used oils. The
Clean Burn Recycling Center works with most Clean
Burn used-oil furnace models and provides a 250
gallon storage tank.
A Clean Burn
Recycling Center makes oil handling and free
heat generation easier because it combines the
tank and furnace in one convenient unit.
In addition to
a Clean Burn furnace and all its components,
the industrial grade Clean Burn Recycling Center
includes a used oil storage tank, legs, supports,
brackets, mounting plates and wiring harnesses.
